BTTLNS

+ Gift Sale

The BTTLNS Little gods wetsuit Oceanus 1.0 is the ideal wetsuit for kids that want to start with openwater swimming. Because the wetsuit features the striking neon orange color, you are always highly visible in the water. The wetsuit is equipped with the right neoprene materials to protect you, but also makes sure you can't break it! The Oceanus is the perfect ratio between price and quality because it responds to the wishes of the target group and is made of the right materials.

Boost your swim-performance with the BTTLNS Goddess Inferno 1.0 wetsuit. Through a combination of flexibility and buoyancy BTTLNS has a new mid-range topmodel. Specially designed and placed Nano-Aerodome panels ensure a nice and central buoyancy, this technique gives up to 30% more lift than traditional neoprene. Fully equiped with 2mm neoprene on the arms, a super flexible pressure lowering neckpanel and 1,5mm speedcuffs.

Now available for athletes who are looking to boost their performance: The god's wetsuit Inferno 1.0! The ultimate use of flexible neoprene ensures optimal buoyancy, making this one of the topmodels amongst mid-range wetsuits. Through specially designed nano-Aerodome panels the Inferno ensures a stable position whilst swimming, this technique will give you 30% additional lift compared to traditional neoprene. Different aspects make sure the inferno will bring out the best of each athlete, fully equiped with speed cuffs - 2mm neoprene on the arms and a pressure lowering neckpanel.

Sale

The BTTLNS Epione 2.0 anti-chafing stick guarantees optimal comfort by preventing chafing, blisters or chapped skin! This 100% natural formula is invisible, waterproof, dry, non-greasy and very easy to apply. Neoprene tolerates the anti-chafing stick and does not stain clothing. Many athletes also use the stick to prevent skin conditions caused by extreme cold or wet conditions. Ideal for swimmers, runners, cyclists, skiers, hikers, water athletes, endurance athletes and athletes.

Sale

The redeveloped BTTLNS Nereus 2.0 wetsuit long sleeve is made with two important principles; lots of flexibility around the shoulders and neutral buoyancy. This wetsuit is extremely suitable for swimmers who have a high lower body position in the water by themselves (naturally) or by their swimming technique. The neutral buoyancy of the Nereus 2.0 is obtained by a 3mm neoprene material which is applied from chest to ankles. The Nereus 2.0 has 1.8mm 39#cell yamamoto neoprene on the arms, shoulders and armpits for very good flexibility and freedom of movement.

Sale

The BTTLNS Cratos 1.0 neoprene kneeskin is the ideal alternative when the water temperature is too warm for a wetsuit and too cold for swimwear. The kneeskin is designed to be worn during open water swimming, but can also be used for many other water sports. Made of 2.0 mm SmoothSkin Neoprene with SCS coating for great flexibility and to ensure minimal water resistance. Equipped with single layer neck construction, YKK zipper and neoprene gripper on legs for ultimate comfort.

Sale

The BTTLNS Tormentor 3.0 wetsuit long sleeve has undergone a further development and uses the latest features in the 'wetsuit world'. The Tormentor is 'the wetsuit' for advanced athletes looking for the best position in the water and maximum speed where the last seconds count! Minimum energy load and maximum endurance is achieved through the ultimate flexibility of the “one-piece shoulder panel” construction. Combined with high-quality 40#cell SCS Yamamoto 1 mm neoprene, this runs over the entire chest, shoulders and upper arms for maximum stretch during every swim stroke. The applied NanoAerodome 5mm at the center of the body, full SCS coating, Speed-Lift thigh panels and SpeedCuffs on the wrists make for one of the fastest wetsuits at the starting line.

Sale

The BTTLNS Cratos 1.0 neoprene kneeskin is the ideal alternative when the water temperature is too warm for a wetsuit and too cold for swimwear. The kneeskin is designed to be worn during open water swimming, but can also be used for many other water sports. Made of 2.0 mm SmoothSkin Neoprene with SCS coating for great flexibility and to ensure minimal water resistance. Equipped with single layer neck construction, YKK zipper and neoprene gripper on legs for ultimate comfort.

Sale

With the BTTLNS Neoprene glue wetsuit repair set Vigor 1.0 you are able to repair damage in your wetsuit by yourself. This repair set contains specially developed smooth neoprene glue to repair tears or holes in your triathlon wetsuit, damaged by nails or other sharp objects. Super strong, durable, fast-drying, black neoprene glue in a 30ml package. This repair kit also contains neoprene discs and a band of different sizes, so you are also able to repair deep cracks!

Sale

The BTTLNS Rapture 3.0 wetsuit long sleeve is a step forward with its improved material, structure, fit, but most importantly with its technological advances. This fantastic entry-level wetsuit uses Yamamoto neoprene, this world leader in neoprene production guarantees excellent flexibility, comfort and freedom of movement. On the arms, shoulders and armpits, panels of 1.8mm Yamamoto #39cell neoprene are applied for the best possible flexibility; even better than its predecessor 'Rapture 2.0'. The 4mm neoprene material on the lower body provides good buoyancy especially for novice swimmers. The Rapture 3.0 uses an SCS coating for less water resistance and an optimized V neck for reduction of a 'choking feeling'.

Sale

The BTTLNS Wetsuit clothing hanger Defender 2.0 is a special designed heavy quality clothing hanger for (wet) wetsuits. The shoulder construction of your wetsuit will stay in natural shape due to the wide construction of the hanger and will not sag during drying or storing your wetsuit. This wetsuit clothing hanger accelerates the drying process, because it is extra wide the wetsuit is open and the material does not hang against each other. This new 2.0 version is made of a new type of plastic, which gives the hanger even more strength. The anti-slip layer is also adjusted, so the wetsuit stays on the hanger with 'open zipper'. Color composition: Divine black-Prestige silver.

Sale

The BTTLNS Goddess sleeveless wetsuit Triton 1.0 is inspired by the qualities and features of the Rapture 2.0 but without the long sleeves. Because this is a sleeveless wetsuit, you benefit from maximum freedom of movement around the shoulders. This freedom of movement is mainly due to the fact that the neoprene material does not interfere with the shoulders. This fantastic entry-level model also uses Yamamoto neoprene, which provides excellent flexibility, comfort and freedom of movement. This wetsuit is perfect for beginner swimmers who do not want any restriction of movement around the shoulders, or often swim in higher water temperatures.

Sale

The BTTLNS Tormentor 3.0 wetsuit long sleeve has undergone a further development and uses the latest features in the 'wetsuit world'. The Tormentor is 'the wetsuit' for advanced athletes looking for the best position in the water and maximum speed where the last seconds count! Minimum energy load and maximum endurance is achieved through the ultimate flexibility of the “one-piece shoulder panel” construction. Combined with high-quality 40#cell SCS Yamamoto 1 mm neoprene, this runs over the entire chest, shoulders and upper arms for maximum stretch during every swim stroke. The applied NanoAerodome 5mm at the center of the body, full SCS coating, Speed-Lift thigh panels and SpeedCuffs on the wrists make for one of the fastest wetsuits at the starting line.

Sale

The BTTLNS Goddess wetsuit Thermal Inferno 1.0 is a thermal wetsuit that is perfect for swimmers who like to be able to swim open water in lower water temperatures. This wetsuit allows you to start earlier in the season, or continue longer into the season when the water temperature is lower than normal. We have kept the specially designed techniques of the Inferno 1.0 and added the thermal element. With the nano-Aerodome panels this suit gives you a stable buoyancy, this specific technology gives you 30% more elevator compared to normal neoprene. Besides the ultimate combination between buoyancy, flexibility and comfort, this wetsuit now also offers extra protection against the cold. Because the qualities of the standard Inferno 1.0 have been preserved, this is the top of the mid-range wetsuits with also a thermal advantage. Where the water with a normal wetsuit quickly gets too cold, you can conquer the cold with this wetsuit! Tip: in combination with the neoprene thermal accessories you are fully protected against the cold water temperatures.

Sale

The BTTLNS Wetsuit clothing hanger Defender 2.0 is a special designed heavy quality clothing hanger for (wet) wetsuits. The shoulder construction of your wetsuit will stay in natural shape due to the wide construction of the hanger and will not sag during drying or storing your wetsuit. This wetsuit clothing hanger accelerates the drying process, because it is extra wide the wetsuit is open and the material does not hang against each other. This new 2.0 version is made of a new type of plastic, which gives the hanger even more strength. The anti-slip layer is also adjusted, so the wetsuit stays on the hanger with 'open zipper'. Color composition: Ambush green.

+ Gift Sale

The revolutionary Carnage 2.0 wetsuit is an absolute top model for the longer distance. By using 0.5mm 44# cell Super-compressed neoprene the flexibility is even higher than that of the carnage 1.0. By combining this extremely high flexibility with Nano-Aerodome Panels BTTLNS has developed a new top suit. The carnage 2.0 features the most advanced technology for unprecedented performance.

Sale

The BTTLNS Rapture 3.0 wetsuit long sleeve is a step forward with its improved material, structure, fit, but most importantly with its technological advances. This fantastic entry-level wetsuit uses Yamamoto neoprene, this world leader in neoprene production guarantees excellent flexibility, comfort and freedom of movement. On the arms, shoulders and armpits, panels of 1.8mm Yamamoto #39cell neoprene are applied for the best possible flexibility; even better than its predecessor 'Rapture 2.0'. The 5mm neoprene material on the lower body provides good buoyancy; perfect for novice swimmers! The Rapture 3.0 uses an SCS coating for less water resistance and an optimized V neck for reduction of a 'choking feeling'.

Sale

The BTTLNS Wetsuit clothing hanger Defender 2.0 is a special designed heavy quality clothing hanger for (wet) wetsuits. The shoulder construction of your wetsuit will stay in natural shape due to the wide construction of the hanger and will not sag during drying or storing your wetsuit. This wetsuit clothing hanger accelerates the drying process, because it is extra wide the wetsuit is open and the material does not hang against each other. This new 2.0 version is made of a new type of plastic, which gives the hanger even more strength. The anti-slip layer is also adjusted, so the wetsuit stays on the hanger with 'open zipper'. Color composition: Violent orange.

Sale

The BTTLNS Goddess wetsuit Ceto 1.0 is the ideal wetsuit for open water swimmers, recreational swimmers or swimmers who like to swim breaststroke. Because the wetsuit features the striking neon orange color, you are always highly visible in the water. The wetsuit is equipped with the right neoprene materials to protect you, but also makes sure you can't break it! The Ceto is the perfect ratio between price and quality because it responds to the wishes of the target group and is made of the right materials.

10% discount

Boost your swim-performance with the BTTLNS Goddess Inferno 1.0 wetsuit. Through a combination of flexibility and buoyancy BTTLNS has a new mid-range topmodel. Specially designed and placed Nano-Aerodome panels ensure a nice and central buoyancy, this technique gives up to 30% more lift than traditional neoprene. Fully equiped with 2mm neoprene on the arms, a super flexible pressure lowering neckpanel and 1,5mm speedcuffs.